AnyTime Customers
1470,08089933031

STEP 1 - Setting up Remote Access (PPP)

1. a. Open Remote Access through your Apple Menu. Click on the Apple Menu and select Control Panels, then on Remote Access.
   
   
   
   
2. Once Remote Access is open, you will need to enter the information details received as shown below. Anytime Customers dial up telephone number is 1470,08089933031.
   Then click on the "Options" button.
   
   
   
   
3. Now select the "Protocol" tab. Next to Use Protocol, click where it says "Automatic" and select "PPP". Click on "OK" and on to Step 2.

1. Click on the Apple Menu and select Control Panels, then click on TCP/IP.
   
   
   
   
2. If you get the following message on the screen, press, "Yes" to enable TCP/IP.
   
   
   
   
3. Next to Connect via, click where it says "Ethernet" and select "PPP". Now, next to Configure, click where it says "Using PPP Server".
   
   
   
   
4. The numbers shown below are numbers you will need to input for the connection to work properly. Click in the box next to "Name server address", and type in the information shown below. Click the upper left square to close this window. When asked "Save changes to the current configuration?", click on the "Save" button.